A roof edge protection hire feature that is used on a building. It helps protect people who are working on the roof from injuries and falls. Roof edge protection is required by Australian occupational safety and health regulations.
When choosing a drip edge, the manufacturer or installer should provide instructions on how to install it safely. They should also provide information on any limitations of the system. If the drip edge will be installed at a height above 2 meters, it is required that the method is documented in a Safe Work Method Statement (SWMS).
There are different types of drip edges available. The most common is the L-shaped drip edge, a simple design. This type is commonly available in aluminum, vinyl, and steel.
Another option is the hemmed drip edge. This design opens up at the bottom of the edge and folds back toward the house. As a result, it uses capillary action to keep water moving downward.
The Asphalt Roofing Manufacturers Association recommends the Type D drip edge, which is more like a "T" than a capital T. It is designed to redirect water away from the fascia and into the gutter.
Other types of roof edge protection include rake edge metal and gutter aprons. Gutter aprons are attached to the fascia board by using a fastener and wood blocking. These protect the fascia from insects and animals. Rake edges are typically installed over eaves, and help to move rain away from the house.
Comments
Post a Comment